GB6-Clean Cut Trimmer


Introducing the GB6-Clean-Cut Precision Trimmer – a 6-inch pruning snip specifically designed for working with small edible plants, flowers, culinary herbs, hydroponics, green bud trimming and cleaning.

These trimmers are built to easily cut up to 5mm or 3/16inch diameter stems and are the go-to tool for today’s growers that need smaller, sharper, easier to clean and more rust resistant blades for green growth pruning.

See below for additional information.

SKU: 002 Category:


The GB6 is the perfect small cutting tool created for both indoor and outdoor gardening enthusiast.

Sharp, stainless steel blades are fabricated with hardened, corrosion resistant, heat tempered, martensitic 2CR13 stainless steel. They are rust and stain resistant and are optimized for durability and longevity.

Comfortable, ergonomically designed, zinc alloy handle bodies and coated with a soft durable Thermo Plastic Rubber (TPR) grip, fit well in either left or right hand allowing for hours of prolonged pruning and clipping use with minimum hand stress.

Whether you are a chef with your own herb garden outside the kitchen door, a professional florist or an indoor hydroponic expert, these are the perfect fine cutting, delicate use, garden trimming scissors that will help make your job easier.

The GB6-Clean-Cut is backed up by our 100% Satisfaction Guarantee. As always, this is a No Risk Purchase!

Here is a short outline about the proper use for the GB6-Clean-Cut Trimmer

The GB6-Clean-Cut is designed to comfortably cut small stems up to 5 millimeters or 3/16 inch diameter.

They will slice through thicker stems with ease but too much force can over stress the zinc alloy handle bodies. For thicker branches take a look at our GR8-Cut Bypass Pruner, it’s designed to handle serious abuse.

The GB6 is a versatile cutting tool that’s the perfect size, weight and feel for delicate green growth cut’s around the home garden. We designed these precision trimmers specifically for cutting, collecting and cleaning small edibles, flowers, culinary herbs and tender indoor hydroponically grown plants.

These pruners are ergonomically designed with soft well-fitting handles that can be used in either your left or right hand.

Remember to always make your pruning cuts at about a 45deg angle leaving a smooth surface.  Smooth clean cuts heal faster. So it is important to keep the GB6 sharp and clean.

To help maintain a healthy plant make cuts close to the remaining bud or trunk, but not right up against it. You want to allow some healing space with out damaging the growing bud or trunk.

These tips are by no means all there is to know about proper usage, but these basics will get you started on the proper pruning track.

Follow the simple directions below and your precision trimmer should cut clean and true for years to come.

The GB6 is designed for delicate trimming, so it is usually used with edibles like culinary herbs, therefore it is not recommended that you lubricate it with a petroleum based product.

If you choose to use a petroleum based lubricant or cleaner just make sure and wipe the access oil off with a dry cloth and spray a little alcohol on the blades and wipe again with another clean cloth before cutting your edibles.

I recommend using a kitchen vegetable oil to keep the GB6 lubricated.

Though the GB6 is constructed with corrosion, stain and rust resistant stainless steel, if the blade is left with plant residue or moisture on it for an extended period of time the blades will begin to corrode.

The best practice for maintenance is to clean the GB6 Trimmer at the end of each day with a little kitchen dish soap and water using an old toothbrush or something similar to clean off any sap or plant residue.

After cleaning and drying, drop a few drops of coconut, olive or any other vegetable oil on the blades. Open and close the blades a few times to make sure the oil gets in between them.

Wipe any excess oil from the Thermo Plastic Rubber Handles that may have gotten on them and store your GB6-Clean-Cut Trimmer in a dry area.

If used for their intended purposes the stainless steel blades on the GB6 will stay sharp for a very long time. Though I recommend giving them a quick clean after each use, they only need to be sharpened every few months or so depending upon use.

To sharpen, first make sure they are clean and dry. Take your file or stone and only on the beveled edge of the blades file all the way along the blade away from you in one direction. I highly recommend the DMT Diamond File Sets. They are thin and easily fit between the blades.

With slight pressure, file repeatedly, slow and easy, at nearly the same angle as the beveled edges. You will notice the edges start to shine as the old metal is shaved off. Do not file back and forth.

After the beveled edges are sharp pass the file once on the under side of the blades to clean off any metal burrs.

Once you are satisfied with the sharpness wipe clean and lubricate all the sharpened steel.

Use these tips and remember, if you keep your Garden Guru Lawn and Garden Tools clean and oiled they will probably last forever.

Additional information


The GB6 is a perfect multi-tool for general use around both the home, kitchen, work-shop and garden. Designed to easily slice through plant material up to 3/16 inches thick. These cutters can be used for just about any light weight cutting and trimming around your home. Ergonomic Zinc Handle bodies, Comfortable Thermo Plastic Rubber Handles and Corrosion Resistant High Grade Stainless Steel Blades combine for a PREMIUM QUALITY must have TOOL.


Use these snips as a super sharp, comfortable scissor for collecting and preparing fresh culinary garden herbs. Great for trimming freshly picked Moringa, Lemon Grass, Rosemary, Basil or for gathering your favorite ornamental flowers for an impromptu spectacular dining room table bouquet. Also, easily and cleanly cut through stubborn plastic food packaging, leaving a nice clean edge.


Light weight, with a heavy feel, these trimmers are great little cutting scissors for snipping your favorite fishing line when tying knots for flies, lures, plugs or leaders. The GB6-Clean-Cut is a perfect craft tool for delicate precision cuts when working on those evening and weekend after work hobbies and home projects.


Flower pedals flutter when the florist picks up the GB6-Clean-Cut Trimmer. Sharp Stainless Steel Blades slice through unneeded stems and leaves like a hot knife through butter. Breathtaking bouquets arrange together like never before while the ergonomic comfortable soft handles go easy on those flower trimming hands.


If there are any unexpected issues with any of our products, we have you covered. We are on call 24/7 to assist all customers and we guarantee to correct any problems fast and hassle free. No confusing, legal ease, run around…guaranteed! 100% Customer Satisfaction, plain and simple.